Analysis of the reasons for "smoking" of dust collector cartridges
Corporate News
2024-11-22 14:46:57
1. Unstable flue gas
When black smoke is seen at the outlet of the dust collector, it may be caused by unstable flue gas. This situation is usually caused by excessive combustible substances in the flue gas, such as volatile organic compounds, sulfur dioxide, nitrogen oxides, etc.
These substances will mix with the flue gas, resulting in unstable flue gas composition, resulting in the phenomenon of black smoke.
The solution is to install pretreatment equipment in front of the dust collector to remove combustible substances in the flue gas and stabilize the flue gas composition.
2. The temperature at the outlet of the dust collector is too low
When the temperature is low in winter, the dust collector may emit white smoke.
The reason for this situation is that the water vapor in the flue gas is not fully evaporated and remains in the flue gas, causing the flue gas to condense.
The solution is to heat the flue gas with heating equipment in front of the dust collector so that the water vapor can fully evaporate, thereby avoiding the condensation of the flue gas.
3. Filter cartridge damage
If the filter cartridge of the dust collector is not cleaned or replaced regularly, the air flow is too small, etc., the dust collector may be in an abnormal state, causing smoke.
The solution is to regularly maintain and clean the dust collector and replace the filter cartridge.
4. Fan failure
The fan is a very important component in the dust collector. If the fan fails, the dust collector exhaust gas treatment efficiency will decrease, and even the dust collector will not work properly. Smoke from the chimney is inevitable.
The solution is to maintain the fan, regularly maintain and repair it, and replace damaged parts in time.
Through regular inspection and maintenance, timely discovery and resolution of problems can effectively avoid the occurrence of these problems, improve the efficiency and performance of the dust collector, and contribute to environmental protection!
When black smoke is seen at the outlet of the dust collector, it may be caused by unstable flue gas. This situation is usually caused by excessive combustible substances in the flue gas, such as volatile organic compounds, sulfur dioxide, nitrogen oxides, etc.
These substances will mix with the flue gas, resulting in unstable flue gas composition, resulting in the phenomenon of black smoke.
The solution is to install pretreatment equipment in front of the dust collector to remove combustible substances in the flue gas and stabilize the flue gas composition.
2. The temperature at the outlet of the dust collector is too low
When the temperature is low in winter, the dust collector may emit white smoke.
The reason for this situation is that the water vapor in the flue gas is not fully evaporated and remains in the flue gas, causing the flue gas to condense.
The solution is to heat the flue gas with heating equipment in front of the dust collector so that the water vapor can fully evaporate, thereby avoiding the condensation of the flue gas.
3. Filter cartridge damage
If the filter cartridge of the dust collector is not cleaned or replaced regularly, the air flow is too small, etc., the dust collector may be in an abnormal state, causing smoke.
The solution is to regularly maintain and clean the dust collector and replace the filter cartridge.
4. Fan failure
The fan is a very important component in the dust collector. If the fan fails, the dust collector exhaust gas treatment efficiency will decrease, and even the dust collector will not work properly. Smoke from the chimney is inevitable.
The solution is to maintain the fan, regularly maintain and repair it, and replace damaged parts in time.
Through regular inspection and maintenance, timely discovery and resolution of problems can effectively avoid the occurrence of these problems, improve the efficiency and performance of the dust collector, and contribute to environmental protection!
If you want to learn more about our products, please contact：
Yulia Zhang
Email: yuliazhang@jnhxgm.com
Phone/WhatsApp/Wechat: (86)19819766150
